Cantilever Ụdị Njem

Nkọwa dị mkpirikpi:

Cantilever Form Traveler bụ ngwá ọrụ bụ isi na ihe owuwu cantilever, nke nwere ike kewaa n'ime ụdị truss, ụdị eriri USB, ụdị ígwè na ụdị agwakọta dị ka nhazi ahụ si dị.Dị ka ihe cantilever owuwu usoro chọrọ na imewe eserese nke Form Traveler, tụnyere ụdị dị iche iche nke Form Traveler e ji mara, arọ, ụdị ígwè , ewu technology wdg, cradle imewe ụkpụrụ: ìhè arọ, mfe Ọdịdị, ike na kwụsie ike, mfe, mfe. mgbakọ na dis-ezukọta n'ihu , ike re-usability , ike mgbe deformation e ji mara, na ọtụtụ ohere n'okpuru Form Traveler , nnukwu ewu ọrụ elu, na-eme ka ígwè formwork ewu arụmọrụ.


Nkọwa ngwaahịa

Nkọwa ngwaahịa

Cantilever Form Traveler bụ ngwá ọrụ bụ isi na ihe owuwu cantilever, nke nwere ike kewaa n'ime ụdị truss, ụdị eriri USB, ụdị ígwè na ụdị agwakọta dị ka nhazi ahụ si dị.Dị ka ihe cantilever ihe owuwu usoro chọrọ na imewe eserese nke Form Traveler, tụnyere ụdị dị iche iche nke Form Traveler e ji mara, arọ, ụdị ígwè , ewu technology wdg, cradle imewe ụkpụrụ: ìhè arọ, mfe Ọdịdị, ike na kwụsie ike, mfe mgbakọ na dis-ezukọta n'ihu , ike re-usability , ike mgbe deformation e ji mara, na ọtụtụ ohere n'okpuru Form Traveler , nnukwu ewu ọrụ elu, na-eme ka ígwè formwork ewu arụmọrụ.

Lianggong Formwork imewe na mmepụta nke Form Traveler ngwaahịa, mejupụtara tumadi nke akụkụ na ala nke isi truss usoro, a bearing support system, ije na arịlịka usoro, nkwusioru ebuli usoro, formwork na scaffold usoro.

Ụdị Lianggong n'ụdị diamond, ụdị ngwaahịa ndị njem na-eme njem, ngwaahịa ya site na ọgbọ atọ nke mmepụta ihe ọhụrụ: BY-1 ụdị ụdị ụdị njem njem ;BY-2 ụdị njikọ ụdị ụdị njem njem;BY-3 Plug-pin njikọ ụdị hydraulic ije Ụdị njem njem. nhazi.

Enwere ike ịhazi Form Traveler iji gboo ihe ndị ahịa chọrọ ma chepụta ya ka ọ kwado koodu mba ụwa.Akụrụngwa ahụ na-ebupụta onwe ya na nhọrọ mbido azụ maka ịkwatu.

The Cantilever Form Traveler Load imewe

(1)Ihe ibu ibu

Dabere na nhazi na nkọwapụta ihe owuwu ụzọ awara awara nke Ministry of Transportation nyere, ọnụọgụ ibu dị ka ndị a:

Ọnụ ọgụgụ buru ibu nke ọnọdụ mgbasawanye na ihe ndị ọzọ mgbe a na-awụsa ihe mkpuchi igbe igbe: 1.05;

Ọnụ ọgụgụ dị omimi nke ịwụsa ihe: 1.2

Mmetụta nke ụdị onye njem na-eme njem na-enweghị ibu:1.3;

Ọnụnọ nke nkwụsi ike nke iguzogide ntugharị mgbe ị na-awụsa ihe na Ụdị Njem:2.0;

Ihe nchekwa maka ojiji nke Form Traveler bụ 1.2.

(2)Ibu na isi truss nke Form Traveler

Ibu igbe igbe: Ibu igbe igbe iji were ngụkọta buru ibu, ịdị arọ ya bụ tọn 411.3.

Ngwa ihe owuwu na ibu igwe mmadụ:2.5kPa;

Ebu nke sitere na mkpofu na ịma jijiji nke konkịtị kpatara:4kpa;

(3)Ngwakọta ibu

Nchikota nchikota nke isi ike na nyocha ike: ihe dị arọ+ ụdị ihe eji arụ ọrụ + ihe eji arụ ọrụ + ibu igwe mmadụ + ike ịma jijiji mgbe nkata na-aga: ịdị arọ nke onye njem ụdị + mmetụta mmetụta (0.3 * ịdị arọ nke onye njem ụdị) + ibu ifufe

Rụtụ aka na nkọwapụta teknụzụ maka ịrụ àkwà mmiri awara awara na ihe ndị e ji akwọ ụgbọ mmiri:

(1) Njikwa arọ nke onye njem ụdị dị n'etiti oge 0.3 na 0.5 nke ihe dị arọ nke th na-agbapụta ihe.

(2) Nrụrụ kacha ekwe omume (gụnyere nchikota nrụrụ èbè):20mm

(3) Ihe nchekwa nchekwa nke mgbochi ntughari mgbe a na-ewu ụlọ ma ọ bụ na-akpụ akpụ: 2.5

(4) Ihe nchekwa nke sistemu ejigidere onwe ya:2

N'ozuzu Ọdịdị

Okwu mmalite nke n'ozuzu Ọdịdị nke Form Traveler

Ụdị ngwaahịa ndị njem nke Lianggong mere, ihe ndị bụ isi ya bụ:

Sistemụ Isi Truss

Sistemụ truss bụ isi gụnyere:

Upper kọọdu, ala ụdọ, anterior oblique mkpanaka posterior oblique mkpanaka, a vetikal mkpanaka, doorframe wdg.

Sistemụ nkwado na-akwado ala

Sistemụ ihe eji ebu ihe n'ala na-enwekarị sistemu ala, ogwe nkwado ihu, ogwe nkwado azụ, hangers oist wdg.

Usoro na usoro nkwado

The formwork na nkwado usoro bụ isi akụkụ nke Form njem

Sistemụ Waling na arịlịka

Sistemụ ije ije na arịlịka na-agụnyekarị

Arịlịka azụ, Kechie wheel edobere, egwu ije, ohiri isi igwe, mgbakwunye ije wdg.

Sistemụ ebuli nkwusioru

Ihe atụ Project nke nkwusioru ebuli usoro

Njikọ nke elu na elu hangers.


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya